Changing the Default Settings
The COPY menu options, including contrast, and image quality can be set to the most frequently used modes.
When you copy a document, the default settings are used unless they are changed by using the corresponding
buttons on the operator panel.
NOTE:
While you set copy options, pressing the AC (All Clear) button cancels the changed settings and returns to the default
status.
To create your own default settings:
1 Press the
(Menu) button.
2 Press the
button until System is highlighted, and then press the
3 Ensure that Defaults Settings is highlighted, and then press the
4 Ensure that Copy Defaults is highlighted, and then press the
5 Press the
button until the desired menu item is highlighted, and then press the
6 Press the
or
button until the desired setting is highlighted or enter the value using the numeric keypad, and
then press the
(Set) button.
7 Repeat steps 5 and 6, as needed.
8 To return to the previous screen, press the
(Set) button.
(Back) button.
(Set) button.
(Set) button.
(Set) button.
Copying
245