Action
3
Adjust the transfer bias.
On the operator panel, press the
a
the
tab → tap
Tools
Adjust Transfer Belt Unit.
Tap
K Offset
or
b
Launch the Tool Box, and click Chart Print on the Diagnosis tab.
c
Click Ghost Configuration Chart.
d
The Ghost Configuration Chart is printed.
Does this solve your problem?
Light-induced fatigue
Action
1
Check the light fatigue pattern using the Pitch Configuration Chart.
Launch the Tool Box, and click Chart Print on the Diagnosis tab.
a
Click Pitch Configuration Chart.
b
The Pitch Configuration Chart is printed.
Does the pattern on the output match with that on the Pitch
Configuration Chart?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem?
(Information) button and tap
→ Maintenance→
Admin Settings
YMC Offset
, and then decrease the value.
Yes
No
The task is complete.
Contact Dell.
Yes
No
Go to action 2.
Contact Dell.
The task is complete.
Contact Dell.
Troubleshooting Guide
541