Dell C2665dnf User Manual page 239

Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Values:
Redial Attempts
Interval of Redial
Resend Delay
Tone / Pulse
Purpose:
To select the dialing type.
Values:
*
Tone Uses tone dialing.
Pulse(10PPS) Sets "DP (10PPS)" (Dial Pulse, 10 Pulse Per Second) as the dial type.
Pulse(20PPS)
Sets "DP (20PPS)" (Dial Pulse, 20 Pulse Per Second) as the dial type.
Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
*
Off
On
Prefix Dial Number
Fax Cover Page
Purpose:
To set whether to attach a cover page to faxes.
Values:
*
Off
Does not attach a cover page to faxes.
On Attaches a cover page to faxes.
*
3
Available Range: 0-13
*
1 minute
Available Range: 1-15 minutes
*
8 seconds
Available Range: 3-255 seconds
Does not set a prefix dial number.
Sets a prefix dial number.
Sets a prefix dial number of up to five digits. This number dials before any
auto dial number is started. It is useful for accessing the Private Automatic
Branch Exchange (PABX).
Sets the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer
will not redial. The value is set in increments of 1.
Sets the interval between redial attempts. The value is set
in increments of 1 minute.
Sets the interval between re-send attempts. The value is set
in increments of 1 second.
Understanding the Printer Menus
237