Usb Settings - Dell C2665dnf User Manual

Login Error
NOTE:
Login Error feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin
Settings and Report/List menu.
Values:
*
Off
*
On 5
Available Range: 1-10
NFC Authentication
Purpose:
To specify whether to enable the authentication using the NFC authentication card.
Values:
Disable
*
Enable

USB Settings

Use the USB Settings menu to change printer settings affecting a USB port.
USB Port
NOTE:
USB Port feature is available only for the USB port on the rear of the printer.
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on
again.
Values:
Disable
*
Enable
PS Data Format
Purpose:
To specify PostScript Level3 Compatible communication protocol for a parallel interface. You can configure the PS
Data Format settings for the wired network. The change becomes effective after the printer is turned off and then on
again.
Values:
Auto
Standard
BCP
TBCP*
Does not allow an administrator to log in after one error entry attempt.
Sets the number of error entry attempts allowed when an administrator logs in.
Does not permit the authentication using the NFC authentication card.
Permits the authentication using the NFC authentication card.
Disables the USB interface.
Enables the USB interface.
Used when auto-detecting the PostScript Level3 Compatible communication protocol.
Used when the communication protocol is in ASCII interface.
Used when the communication protocol is in binary format.
Used when the communication protocol supports both ASCII and binary data to switch
between them according to the specified control code.
Understanding the Printer Menus
257