Making or receiving a phone call
Making a call
First connect your phone to the relevant interface. For further information, see
the Installation Manual.
You have different options for making a call:
Short Dial. If the number is in the phone book of the terminal, you can use
•
the Short Dial number, which is found in the first column of the phone book
in the web interface. See Short dial on page 83.
Simply dial 00 <Short Dial> followed by # or off-hook key.
Example: To call entry number 4 in the phone book,
Manual Dial. To make a call, dial
•
00 <country code> <phone number> followed by # or off-hook key.
Example: To call the number +45 39558800 from an analog or ISDN
Call from phone book or call log (only IP handset).
•
•
Enter the phone book of the IP handset, scroll to the wanted number
and press the off-hook key, or
•
press the off-hook key from the main screen to display the latest calls in
the call log. Then scroll to the wanted number and press the off-hook
key again.
Note that this is the call log of the IP handset, not of the terminal.
If there was an error establishing the connection, refer to the Troubleshooting
Guide on page 187.
If you are using the IP handset, the handset may show an error message.
Depending on the type of error, the web interface may also show an error
message. See Viewing the Event list or the Event log on page 182.
dial 004 followed by # or off-hook key.
phone, dial 00 45 39558800 #
Using a phone or fax machine
Chapter 3: Operating the system
47