Starting Up The Terminal - KVH Industries FB250 User Manual

Starting up the terminal

SIM card
Note that the TracPhone terminal requires a SIM card dedicated to
FleetBroadband. The terminal can only access the BGAN network when the
right type of SIM card is installed. For information on how to insert the SIM
card, refer to the installation manual.
Switching on the terminal
Using the Power switch
Note
If you have the 19" Rack variant of the TracPhone terminal, you can
use the on/off switch in the front panel. See the next section 19" Rack
terminal: Using the front power switch.
To switch on the terminal, use the On/Off switch in the connector panel. It
normally takes one or two seconds for the terminal to switch on.
Starting up the terminal
Chapter 2: Getting started
21