Connecting The Tracphone Fleetbroadband Ip Handset - KVH Industries FB250 User Manual

Connecting the TracPhone FleetBroadband
IP handset
Power supply (PoE)
The TracPhone FleetBroadband IP Handset is powered from the LAN interface,
using Power over Ethernet. The total output power from all 4 interfaces is
• 64 W at 24 V DC power supply
• 32 W at 12 V DC power supply
All interfaces can support devices of power class 1, 2 and 3 (4, 7 and 15.4 Watt),
as long as the total power consumption does not exceed the above limits. If
the limits are exceeded, the LAN ports are prioritized so that LAN port 1 has the
highest priority.
In case of power hold-up (failure on input power), PoE will be turned off
completely.

Connecting the TracPhone FleetBroadband IP handset

Chapter 2: Getting started
25