Call Forwarding - KVH Industries FB250 User Manual

Fleetbroadband
Hide thumbs Also See for FB250:
Table of Contents

Advertisement

If you select Disabled, your Streaming connection will not be buffered.
This means the data is delivered immediately, but may vary slightly in
transmission speed.
4. Click Apply.
Setting up call services
Overview
The setup of call services is also common for all interfaces.
Note
The terminal must be registered on the BGAN network before you
can set up the call services in the web interface.
In the web interface you can set up the following supplementary services:

Call forwarding

Call barring
Call waiting
Line identification
Closed user group
Note that, depending on the network, some of these call service settings may
prevent others from being activated.
The settings apply for all connected devices using a circuit-switched service.
Call forwarding
You can set up the terminal to automatically forward incoming calls to another
phone number. This information is saved in the BGAN network so it is
available when the call cannot be put through and must be forwarded. This
service is usually set up by the airtime provider.
Chapter 4: Using the web interface
Setting up the interfaces
111

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fb500Tracphone fb250Tracphone fb500

Table of Contents