Selecting the preferred BGAN satellite
Overview
By default the terminal is set up to automatically find the most appropriate
satellite to connect to ("Auto" mode). However, if you are located in an area
with more than one BGAN satellite available, you can select the satellite you
prefer to use when registering on the BGAN network.
To select the preferred BGAN satellite
To select the preferred BGAN satellite, do as follows:
1. Select SETTINGS > Satellite selection from the left navigation pane.
2. Select the satellite you prefer to use.
If you select Auto (the default setting) the TracPhone system
automatically uses the most appropriate satellite.
Important
3. Click Apply.
If you have any ongoing calls or data sessions, they will be
terminated when you click Apply!
Selecting the preferred BGAN satellite
Chapter 4: Using the web interface
153