To view the Event log, select HELPDESK > Event log from the left navigation
pane.
Self test
The Self test performs system test on the TracPhone system, similar to the tests
that are performed during the Power On Self Test (POST).
Important
To activate a Self test, do as follows:
1. Select HELPDESK > Self test.
2. Click Self test.
3. Click OK in the Warning dialog.
The terminal now reboots and performs a self test.
Extended status
To see the Extended status page, select HELPDESK > Extended status.
To view updated information on the Extended status page, click Refresh.
The Extended Status page shows the following information:
•
The antenna Product ID.
The terminal will reboot when performing the self test. All
ongoing calls or data sessions will be terminated.
Event logging and self test
Chapter 4: Using the web interface
183