Sim Card - KVH Industries FB250 User Manual

Chapter 1: Introduction
The terminal is also available in a 19" Rack version. The 19" Rack terminal is
the same as the basic version, except for the housing which fits in a 19" rack
and has an additional power switch on the front panel.
For information on how to install the terminal, refer to the installation manual.
Tools for setup and daily use
The TracPhone FleetBroadband IP Handset can be used for displaying status,
accessing a subset of controls and views, starting a streaming session and
entering the PIN code for the terminal. The IP handset connects to the LAN
interface of the terminal. For information on how to use the handset, see the
user manual for the IP handset.
The built-in web interface in the terminal is used for easy configuration and
daily use. The web interface is accessed from a computer connected to the
terminal, using an Internet browser. No installation of software is needed.
For details on the web interface, see Chapter 4, Using the web interface.

SIM card

The terminal has a SIM (Subscriber Identity Module) slot located in the
connector panel behind a small cover plate.
The terminal requires a dedicated FleetBroadband SIM card, which you get
from your Airtime Provider.
8 Main units