Logging Of Events - KVH Industries FB250 User Manual

ID Event Text
0912A
Motor stopped

Logging of events

Diagnostic report
When contacting your distributor for support, please include a diagnostic
report.
The diagnostic report contains information relevant for the service personnel
during troubleshooting.
To generate the diagnostic report, access the web interface and select
HELPDESK. Then click Generate report.
Event log
The event log holds information of events registered in the terminal or
antenna. The same events, when active, are also indicated in the Antenna and
Terminal LEDs on the terminal LED panel.
The log includes the time of the occurrence, a short description, location of the
error etc. This information can help troubleshooting errors in the system. You
can see the event log in the web interface. For further information, see
Viewing the Event list or the Event log on page 182.
Explanation
The motors in the
antenna have
stopped because
the temperature is
critically high or
critically low.
Logging of events
Chapter 5: Troubleshooting
Remedy
When the
temperature is
normalized the
motors
automatically start
up again.
213