Speed Dialing A Party; Calling A Party From The Call Log - Avaya 4610SW User Manual

Speed Dialing a party

Automatic dialing of stored numbers or URIs is the most common method of automatic dialing.
You can set up Speed Dial buttons and select the party you want to call by pressing that button.
For information on setting up Speed Dial buttons, see
Application. The 4610SW SIP IP Telephone has advanced capabilities that allow up to 48
Speed Dial entries, making speed dialing convenient and efficient.
1. Press the SpDial softkey at the bottom of the display screen.
The first six Speed Dial buttons display one name and number/URI per button. The prompt
"Select entry to dial." appears at the top of the display area.
2. If the party you want to call appears on the display, proceed to Step 3. If the party you want
to call is not shown, press the Page Right (
Continue until the screen displays the number/party you want. You can also press the Page
Left ( ) button to display the preceding page of entries.
3. Press the Line/Feature button associated with the name and number/URI of the person you
want to call.
The number of the selected person dials automatically.
4. Pick up the handset, activate the headset, or use the Speaker to proceed with the call.
5. Hang up the handset, deactivate the headset, or press the Speaker (
the call.
Note:
Usually, you can label administered Feature buttons as you see fit, as described
Note:
in Feature Button Labeling

Calling a party from the Call Log

Your 4610SW SIP IP Telephone maintains a log of up to 45 outgoing, incoming answered, and
incoming unanswered calls to/from your telephone. Each log can have up to 15 calls.
Note:
You or your Telephone Administrator can disable the Call Log Application. If the
Note:
Call Log Application is unavailable, selecting the Log softkey generates an error
tone.
1. To call a party listed in the Call Log, press the Log softkey at the bottom of the display area.
The first three missed calls display a name and number/URI. The prompt "Select entry for
details." appears at the top of the display area.
2. If the party you want to call is in a different Call Log, press the softkey that represents either
the Outgo or InAns Call Log.
The display area shows the selected Call Log.
Chapter 3: Using the Speed Dial
) button to display the next page of entries.
on page 68.
Making Calls
) button to end
Issue 2.2 August 2005 27