Adding A Speed Dial Button - Avaya 4610SW User Manual

Using the Speed Dial Application

Adding a Speed Dial Button

To add a Speed Dial button:
1. Access the Speed Dial Application by pressing the SpDial softkey.
The telephone displays the Speed Dial Main screen.
Note:
Your Telephone Administrator can turn off the ability to make changes to the
Note:
Speed Dial buttons. If this is the case, you are not shown softkeys labeled Add,
Edit, or Delete, and you cannot perform any of those actions.
2. Press the Add softkey.
The telephone displays the Speed Dial Name Entry screen with a cursor in the Name field,
and with the prompt "Use dialpad to enter Name.".
Note:
For assistance with entering information on this screen, see the previous section
Note:
titled
3. Use the dialpad to enter the name of the person being added to a Speed Dial button. Use up
to 13 characters, or press Cancel to return to the Speed Dial Main screen without adding a
name.
4. After completing the Name field, press the Done softkey.
The Speed Dial Field Selection screen displays the prompt "Use dialpad to enter Number.".
The cursor is positioned at the start of the Number field.
5. Choose one of the following options:
If you want to
Add a telephone number
Add a URI
6. Press the Done softkey.
The telephone displays the Speed Dial Field Selection screen.
40 4610SW SIP IP Telephone Release 2.2 User Guide
Entering Data on Speed Dial
Then
Use the dialpad to enter the number of the person for whom
you are establishing a Speed Dial button. For more
information, see
Press the URI softkey.
The Speed Dial URI Entry screen displays the prompt "Use
dialpad to enter URI.".
Use the dialpad to enter the URI of the person for whom you
are establishing a Speed Dial button. If you are not familiar
with entering characters or using symbols, see
URI
Screens.
Entering a Number
on page 36.
on page 36.
Entering a