Editing During or After Entry
You can find editing commands below the Name, Number, or URI field, next to certain Line/
Feature buttons. When more than one screen of editing commands exists, use the More softkey
to see one or more additional screens of commands. Examples of some editing commands and
their actions are:
Backspace - Deletes the character to the immediate left of the cursor.
●
Clear - Removes all characters from the field in which the cursor currently resides.
●
Case (softkey 2) - Changes the character to the right of the cursor from lowercase to
●
uppercase or vice versa, depending on its original case. Note that when entering a name,
the first character entered is in uppercase, with subsequent characters in lowercase
letters. When you enter a URI, all characters are in lowercase.
Symbol (softkey 3) - Displays the Symbol Character screen, from which you can select
●
one of the following attributes:
- . Period - Inserts a period at the cursor position.
- , Comma - Inserts a comma at the cursor position. In a Number field, a comma creates a
short pause when the telephone automatically dials that number.
- - Hyphen - Inserts a hyphen at the cursor position.
- Space - Inserts a blank space at the cursor position.
- / Slash - Inserts a slash at the cursor position.
- ' Apostrophe - Inserts an apostrophe at the cursor position.
Note:
Some of the editing commands, such as Case, appear only when there is data in
Note:
the field in which the cursor is positioned. Pressing one of these buttons causes
the respective action to be taken at the current cursor position.
The Symbol softkey is not shown if the text string already contains the maximum
number of characters.
Entering Data on Speed Dial Screens
Issue 2.2 August 2005
37