Manual Dialing - Avaya 4610SW User Manual

Using Your 4610SW SIP IP Telephone
This section describes these calling methods. Your SIP IP telephone accepts either a telephone
number or a Uniform Resource Identifier (URI) for dialing.
Note:
You can opt to see the Phone screen when you make an outgoing call, or to keep
Note:
the current screen when you dial. For more information, see
in Chapter 6: 4610SW SIP IP Telephone

Manual Dialing

Dial a call manually by:
picking up the handset, activating your headset, pressing the Speaker button,
●
pressing an idle session appearance with the telephone on- or off-hook, or
●
pressing the Drop button to disconnect an active session appearance and using that line
●
to start a new call.
1. Use any method listed to obtain a dial tone. You can also start dialing with the telephone
on-hook. In this case, the telephone automatically goes off-hook and activates the Speaker
after you press the first keypad digit.
If the Phone screen is active, the first available call appearance line displays the off-hook
( ) icon and the background appears shaded.
If the Phone screen is not active, the top display line provides call-related messages.
If applicable, the top of the display area shows the Call Timer.
Note:
Displaying the Call Timer is optional and is set using the Options button.
Note:
See
2. Choose one of the following options:
If you want to
Dial a telephone number
Dial a URI
24 4610SW SIP IP Telephone Release 2.2 User Guide
Chapter 6: 4610SW SIP IP Telephone Options
Then
Use the dialpad to enter the number you want to call.
Press the URI softkey.
The display prompts "Use dialpad to enter URI.".
Use the dialpad to enter the URI you want to call and press
Send. If you are not familiar with entering characters or using
symbols, see
Options.
for information.
Entering a URI on page 36.
Application Options