Lifecycle 9100 and 9500HR Series Exercise Bikes
How To...REMOVE AND REPLACE THE SEAT PLUNGER
Tools Required: Intemal Snap Ring Pliers
1.
Pull the seat pin back and depress the stopper peg on the SEAT POST ROD and guide the seat post from the
bike frame.
2.
Insert the tip of the internal retaining pliers into the SEAT PIN RETAINING RING. Guide the SEAT PIN
RETAINING RING out from the SEAT PIN ASSEMBLY.
3.
Pull the SEAT PIN PIN ASSEMBLY away from the bike frame.
4.
Insert the new SEAT PIN ASSEMBLY into the bike frame. Secure the SEAT PIN ASSEMBLY by installing the
PIN RETAINER RING with the internal retaining ring pliers.
5.
Pull the SEAT PIN back and reinstall the SEAT POST into the bike frame.
NOTE: MAKE SURE THE SEA T IS PROPERL Y SECURE BEFORE RIDING.
~
"
,
,
"
"
,
I' ,
22
•
•
•