Removing Printed; Removing Single Sheets; Removing Continuous Forms; Clearing The Print Buffer - Fujitsu DL7600 User Manual

REMOVING
PRINTED PAGES
CLEARING THE
PRINT BUFFER
User's Manual
This section describes the best methods for removing single sheets or
continuous forms paper after printing.

Removing Single Sheets

When you print using software, the printer automatically ejects each
sheet of paper when the end of the printed page is reached. To eject
sheets manually, use one of the following methods:
•
Press and hold down the LF/FF button to execute a form feed.

Removing Continuous Forms

To avoid wasting paper, use the printer tear-off function to remove
continuous forms paper. Press the TEAR OFF button to advance the
perforation to the tear-off edge. Tear the paper off, and then press any
button to retract the paper back to the top-of-form position. See Chapter
3 for more detailed instructions.
Place the printer offline. Press the PRINT MODE and AUTO GAP
buttons simultaneously to clear all data from the print buffer. This
method is useful when you cancel a print operation and do not want to
continue printing data already sent to the printer.
This method does not change or clear MENU1 and MENU2 settings,
paper loading position settings, and downloaded fonts.
PRINTING
4-5