Fujitsu DL7600 User Manual page 65

[7][8]
User's Manual
In the next two cases, the number of cut sheets stacked in the printer may
be reduced depending on printing conditions and environments. Follow
the notes.
With rear tractor and front optional cut sheet feeder and
large stacker(optional) and large paper table(optional).
(2) Rear tractor
(3) Paper table
(4) Paper table
(5) Front cut sheet feeder → Print → Paper table
(6) Front cut sheet feeder → Print → Rear stacker
[4]
[6]
(2)
With front or rear tractor (either optional)and rear optional cut sheet
feeder and large stacker(optional) and large paper table(optional).
In addition, the front and rear tractor (either is optional) can be mounted.
(1) Front tractor
(2) Rear tractor
(3) Paper table
(4) Paper table
(7) Rear cut sheet feeder → Print → Paper table
(8) Rear cut sheet feeder → Print → Rear stacker
[4]
[1]
[8]
(2)
→ Print → Front eject
→ Print → Paper table
→ Print → Rear stacker
[2]
→ Print → Rear eject
→ Print → Front eject
→ Print → Paper table
→ Print → Rear stacker
PAPER HANDLING
[3] [5]
(5)(6)
(3)(4)
[2]
[3][7]
(3)(4)
(1)
3-7