Mounting And Removing The Tractor Unit - Fujitsu DL7600 User Manual

SETTING UP
2-12

Mounting and removing the tractor unit

Tractor unit at the front
[Removing the tractor unit]
Raise the soundproof cover. While pressing the lock levers of the
tractor frames located on both sides of the tractor unit, lift out the
Lock lever
tractor unit to remove it.
[Mounting the tractor unit]
1) Position the U-shaped slots on both sides of the tractor unit over the
guide pins of the printer unit. (To set the tractor unit in position, line
it up with the groove of the left guide pin. The right guide pin has
no groove).
2) Push down the shaft at the front of the tractor unit until it locks with
an audible click. (Do not press the lock levers when pushing down
the shaft.)
Guide pin
U-shaped slot
Soundproof cover
Lock lever
Guide pin
U-shaped slot
User's Manual