Fujitsu DL7600 User Manual page 100

USING SETUP MODE
5-6
4. Select the current emulation.
Since you do not want to change the emulation, press the " "
button to select the current emulation and print the next item,
<FONT> and its options.
5. Change the font to Prestige Elite 12.
Press the "TEAR OFF" or "LOAD" button once to position the
cursor on the left edge of the aluminum print guide on
PRSTG12. Press the " " button to select PRSTG12 and print
the next item, <QUALITY>, and its options.
6. Select the current print quality.
Since you do not want to change the print quality, press the
button to select the current print quality and print the next item,
<PITCH>, and its options.
7. Change the pitch to 12 cpi and exit the MENU2 function.
Press the "TEAR OFF" or "LOAD" button once to position the
cursor on the left edge of the aluminum print guide on 12 CPI.
Since you do not want to make any other changes in MENU2,
press the ONLINE button to select 12 CPI and exit MENU2.
The <<FUNCTION>> menu is then reprinted.
8. Exit setup mode, saving the new font and pitch.
Since the cursor on the left edge of the aluminum print guide is
on SAVE & END, press the
MICRO FEED button to select SAVE & END. The printer
saves Prestige Elite 12 and 12 cpi as the new power-on defaults
in MENU2. The printer then exits setup mode and returns
online. These settings remain in effect until changed.
MICRO FEED button or the
User's Manual