Adjusting For Paper Thickness (Led) - Fujitsu DL7600 User Manual

ADJUSTING FOR
PAPER THICKNESS
(LED)
User's Manual
The printer can handle paper of different thicknesses, including multipart
forms with up to nine parts (original plus eight copies). For details on
paper thickness specifications, see Appendix B.
The printer automatically adjusts for different paper thicknesses.
You can use the MANUAL GAP DIAL to adjust the paper thickness
manually at manual mode. To place printer manual mode, press AUTO
GAP buttons 2 seconds or more so that AUTO GAP lamp is off.
Adjusting the manual gap dial
Table 3.2 Manual Gap Dial Settings (LED)
Number of Copies
(Including the Original) *1
1 copy
2 copies
3 copies
4 copies
5 copies
6 copies
7 copies
8 copies
9 copies, Envelopes
Slips
Ribbon replacement
*1 For carbon-interleaved paper, the carbon counts as one copy.
*2 Vary the setting up or down (including A to R) to optimize printing
especially for labels and envelopes. Select R when replacing a
ribbon or clearing a paper jam.
NOTE
If printing is messy, the ribbon misfeeds, or the paper jams, move
the lever one setting higher.
PAPER HANDLING
Setting *2
1
2
3
4
5
6
7
8
A
B, C, D
R
3-9