Fujitsu DL7600 User Manual page 25

: Operation can be performed when the printer is in this state.
— : Operation cannot be performed when the printer is in this state.
N/A: Does not apply.
Operation
Select auto adjusting for paper
thickness.
Adjust for paper thickness
manually
Save adjusted load positions
Select MENU1 or MENU2
Clear print buffer
Reset power-on defaults
Start/stop/resume printing
Resume printing after paper
Enter setup mode
Enter font/pitch/quality
Setting mode
Exit to normal mode
Self-test printing
User's Manual
Printer Operations (Normal Mode) (Cont.)
Online Offline
—
—
—
—
—
Required Response
(LED type)
Press AUTO GAP 2 second or more.
So that AUTO GAP lamp lights
(LCD type)
Press GAP ADJUST.
So that LCD display "AUTO"
(LED type)
Press AUTO GAP 2 second or more.
So that AUTO GAP lamp is off.
Then manual gap dial become effective.
(LCD type)
Press GAP ADJUST repeatedly.
So that LCD display
"GAP-1～GAP9,GAP-A～GAP-D
Press ONLINE and LOAD.
Press ONLINE and LF/FF.
(LED type)
Press FRONT DIR and AUTO GAP.
(LCD type)
Press PRINT MODE and GAP ADJUST.
Turn printer off, then on.
Start: Send print command.
Stop/resume: Press ONLINE.
Press ONLINE.
(LED type)
Press AUTO GAP and HI IMPACT.
(LCD type)
Press SET UP.
(LCD type only)
Press FONT/PITCH.
Start: Turn printer off. Press LF/FF while
turning printer on.
Pause/resume: Press LOAD.
Exit: Press ONLINE.
QUICK REFERENCE
QR-3