Fujitsu DL7600 User Manual page 216

COMMAND SETS (DPL24CPLUS)
C-6
Function
Tabulation
Horizontal tab execution
Set horizontal tabs
The values of n to n
1
are the ASCII values of the print
columns (at the current character width)
at which tabs are to be set.
(1 < n < 255) (1 < k < 255)
Move to print column n (1 < n < 255)
Move dot column n/360 inch
× 256)
(n = n + n
1 2
The value below is for 136-column printers.
(0 < n < 255) (0 < n
1
× 256 + n
(0 < n < 4895)
2 1
Horizontal relative move by n/360 inch
(-999 < n n n < +999)
1 2 3
n , n , and n are the hundreds, tens, and
1 2 3
units digits of the distance.s is a plus
or minus ( + or -) sign.
Vertical tab execution
Set vertical tabs
The values of n to n
1
are the ASCII values of the lines (at the
current line spacing) at which tabs are
to be set.
(1 < n < 255) (1 < k < 64)
Move to line n (1 < n < 255)
Page Formatting
Set right margin (0 < n < 255)
Set left margin (0 < n< 255)
Set perforation skip by n lines
(1 < n < 127)
Perforation skip off
Set page length to n lines
(1 < n < 127)
in this command
k
< 19)
2
in this command
k
Command
HT
ESC D (n ) ... (n )
1 k
NUL
ESC HT (n)
ESC $ (n ) (n )
1 2
ESC e R (s)
(n ) (n ) (n )
1 2 3
VT
ESC B (n ) ... (n )
1 k
NUL
ESC VT (n)
ESC Q (n)
ESC 1 (n)
ESC N (n)
ESC O
ESC C (n) or
ESC FF (n)
User's Manual