6.
Remove the DIMM from the slot.
IMPORTANT:
To replace the component, reverse the removal procedure.
CPU baffle
CAUTION:
CPU baffle or CPU in each CPU socket. The CPU baffle is needed for proper system cooling
CAUTION:
socket pins, the socket should never be uncovered for more than 5 seconds. If the socket is damaged,
the entire base blade must be replaced.
1.
power off the server blade and remove it from the server blade enclosure
server blade for
2.
Remove the access panel
DIMMs do not seat fully if turned the wrong way.
To prevent damage to the server blade, never power on a server blade without a
Immediately install a CPU baffle in an empty CPU socket. To avoid damage to the
servicing").
("Access panel" (page
113)).
("Preparing the
CPU baffle
1 17