Installing The Cpu Air Baffle; Additional Documentation - HP ProLiant SL160s Installation Instructions Manual

IMPORTANT: The one close to front panel is processor 2 and
the other one is processor 1. During install the heat sink, make
sure the side with a triangle logo close to the DIMMs.
Figure 15 Installing the heat sink assembly
CAUTION: Be sure that the heat sink sits squarely on the
processor, or overheating and damage to the processor may
occur.
IMPORTANT: If the heat sink has been removed for any reason,
it is critical that you apply more thermal interface material to the
integrated heat spreader on the processor to ensure proper
thermal bonding between the processor and the heat sink.
Clean the contact surface of both the processor and heat sink
with an alcohol pad, and then re-apply an HP-approved
thermal interface material before reinstalling the processor. Use
a pattern of five dots when applying the thermal interface
material—one dot in the center, and one dot at each corner.
NOTE: Do not over tighten the heat sink's spring-loaded screws
to prevent them from breaking off.

Installing the CPU Air Baffle

NOTE: The CPU air baffle is required for proper thermal
solution.
To install the CPU air baffle:
1. Align the CPU air baffle to the tray.
2. Secure the latches to the tray as described in below figure.
3. Press down the CPU air baffle to install it and make sure it full
connects to the tray.
Figure 16 Installing the CPU air baffle into the tray

Additional Documentation

For additional documentation, refer to HP ProLiant SL160s G6 Server
Easy Set-up CD. You can also access additional information and
documentation from the HP external website, either by connecting
directly or through the Easy Set-up CD.
Legal notices
© Copyright 2010, 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 635239-002
February 2011 (Second Edition)