HP Integrity BL860c i2 User's & Service Manual page 94

Item
4
5
6
7
8
9
See Figure 1 (page 94)
1
If the Onboard Administrator denies power to the server blade, the server blade returns to Standby mode.
Figure 1 iLO Heartbeat LED detail view
NOTE: The iLO heartbeat LED is visible when looking through the front grill of the Blade Link
nearest to the hard drive bays.
If the blade is installed in a c7000 enclosure, then the LED is visible through the third and
fourth holes from the top of the blade in the leftmost row of holes.
If the blade is installed in a c3000 enclosure, then the LED is visible through the third and
fourth holes from the left side of the blade in the bottommost row of holes.
94 Troubleshooting
Description
NICs 1, 2, 3, 4
Monarch power button / Monarch
power LED
SUV connector
Physical Presence Button
Partition Identifier
Blade power LED
iLO 3 Heartbeat (behind grill)
Status
Green = Network linked
Green flashing = Network activity
Off = No link or activity
Green = Blade is acting as Monarch
and is powered on
Amber = Blade is acting as Monarch
and is in standby
Off = Blade is not Monarch
N/A
N/A
Green = Blade is in a partition
Off = Blade is not in a partition
Green = Server blade is powered on
Amber = standby (auxiliary power
1
available)
Off = Off
Green flashing = iLO 3 Active
Solid green or off = iLO 3 failure or no
standby power