Adjusting Surround Mode Using Remote Control - JVC RX-DV3SL Instructions Manual

Creating Realistic Sound Fields
Adjusting Surround Mode
Using Remote Control
When playing back the source with Surround mode, you can adjust
the speaker output levels for Surround modes.
Once you have adjusted the Surround modes, the adjustment is
memorized for each source.
• You can also adjust Surround modes using the Choice menu (see
pages 47 to 52) or buttons on the front panel (see page 24).
• When using test tone, you can adjust the speaker output levels
without playback sounds.
1
Select and play back software you like.
2
Activate and select Surround mode.
• When 2-channel source is played back, you can select
Surround modes.
3
Adjust the sound.
1) Press SOUND.
Number buttons now work for the sound adjustment.
2) Adjust the speaker output levels as follows:
To adjust center speaker, press CENTER +/–.*
To adjust left rear speaker, press REAR•L +/–.
To adjust right rear speaker, press REAR•R +/–.
To adjust subwoofer, press SUBWOOFER +/–.
To adjust the effect level, press EFFECT.**
The name for the item currently adjusted appears on the
display. For details, see the illustrations of "Speaker output
levels" on page 24.
Mode
Dolby Digital
DTS Digital Surround
Dolby Pro Logic II
All Channel Stereo
Note:
• You cannot adjust the speakers which are not used by the selected Surround mode.
– TV/DBS CH +
SOUND EFFECT CENTER
1 2 3
ANALOG
TEST REAR·L
/DIGITAL
4 5 6
INPUT
AUDIO SURR ON/OFF REAR·R
7 8 9
– +
SUBTITLE SURR MODE SUBWOOFER
10/0 +10 VFP
100+ TV RETURN
PROGRESSIVE
DIMMER
Relation between Surround modes and adjustable items
Item
TEST
DAP
Notes:
• You can adjust the speaker output levels for the
activated speakers ONLY (the speaker indicators are
lit on the display).
* You cannot adjust the output levels of center speaker
when one of DAP modes is activated.
** You can adjust the effect level only when one of DAP
modes is activated.
• Before operating the DVD player using remote
control, press DVD to change the remote control
operation mode to DVD.
1) Press SOUND.
2) Press TEST.
The playback sound stops during playback.
"TEST L" starts flashing on the display and a test tone comes
out of the speakers in the following order:
(
Left front speaker
3) Adjust the speaker output level as follows:
To adjust center speaker, press CENTER +/–.
To adjust left rear speaker, press REAR•L +/–.
To adjust right rear speaker, press REAR•R +/–.
Notes:
• You cannot adjust the speaker output levels if you have set the
speaker information to "NO."
• No test tone comes out of the speaker when its speaker
information is set to "NO."
• When you press EFFECT or SUBWOOFER +/–, the test tone
stops.
4) Press TEST to stop the test tone.
The test tone stops.
• When no operation is done, the test tone stops automatically
in about 1 minute.
CENTER REAR•L
For using test tone
) ( )
Center speaker
( ) (
Left rear speaker Right rear speaker
: Possible : Impossible
REAR•R SUBWOOFER
( )
Right front speaker
)
EFFECT
28