Tuner Operations; Setting The Am Tuner Interval Spacing; Tuning Into Stations Manually; Using Preset Tuning - JVC RX-DV3SL Instructions Manual

Tuner Operations

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing.
• 9 kHz interval spacing is the initial setting.
On the front panel ONLY:
1
Turn off the unit.
• Be sure that the unit is plugged into a wall outlet.
2
Change the interval spacing.
To set the AM tuner to the 10 kHz spacing:
Hold down CONTROL 3 and press
"10k STEP" appears on the display for a while.
CONTROL
To set the AM tuner to the 9 kHz spacing:
Hold down CONTROL 2 and press
"9k STEP" appears on the display for a while.
CONTROL
The unit is turned on with the interval spacing changed.

Tuning into Stations Manually

On the front panel:
1
Press FM/AM to select the band.
The last received station of the selected band is
tuned in.
The CONTROL buttons now work for tuner
operations.
• Each time you press the button, the band alternates between
FM and AM.
ANALOG
SPK.
L R
Ex. : When selecting the FM band
2
Press CONTROL ∞ (or 5)
repeatedly until "< TUNING >"
appears on the display.
ANALOG
SPK.
L R
3
While "< TUNING >" still remains
on the display, press repeatedly or
hold CONTROL 3 (or 2) until you
find the frequency you want.
ANALOG
SPK.
L R
• Pressing (or holding) CONTROL 3 increases the frequencies.
• Pressing (or holding) CONTROL 2 decreases the frequencies.
17
STANDBY/ON.
STANDBY/ON
STANDBY/ON.
STANDBY/ON
FM/AM
E
AUTO MUTING
VOLUME
MHz
CONTROL
AUTO MUTING
VOLUME
CONTROL
TUNED STEREO AUTO MUTING
VOLUME
MHz
From the remote control:
1 Press FM/AM.
2 Press repeatedly or hold TUNING 9 or ( until you find the
frequency you want.
• Pressing (or holding) TUNING 9 increases the frequencies.
• Pressing (or holding) TUNING ( decreases the frequencies.
Notes:
• When you hold and release CONTROL 3 (or TUNING 9 on the
remote control) or CONTROL 2 (or TUNING ( on the remote
control), the frequency keeps changing until a certain station is
tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
7
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 2 again.
On the front panel ONLY:
1
Tune into the station you want to preset (see
"Tuning into Stations Manually").
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the
FM Reception Mode" on page 18.
ANALOG
SPK.
L R
Ex. : When selecting the FM band
2
Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
ANALOG
SPK.
L R
3
Press CONTROL 3 (or 2) to select
a channel number while the channel
number position is flashing.
ANALOG
SPK.
L R
TUNED STEREO AUTO MUTING
VOLUME
MHz
MEMORY
TUNED STEREO AUTO MUTING
VOLUME
MHz
CONTROL
TUNED STEREO AUTO MUTING
VOLUME
MHz