Confirm Reset Menu; Exit Menu; Default Settings On Power Up; Default Settings On System Reset - Extron electronics RGB 302 User Manual

Confirm Reset Menu

Exit Menu

Default Settings on Power Up

Default Settings on System Reset

• Menu language is set to English
• Backlite is set On
• Memory Cycling is set On
• Horizontal Shift is Center
• Vertical Shift is Center
• Level is Center
• Peaking is Minimum
• Sync Output is Automatic
Page 3-11
The Confirm Reset menu actually resets the
RGB 302/304 to its factory settings. Press the
and
press
MENU
cycle, or allow the time-out to occur. A reset
message will be displayed if reset was
selected.
By allowing the time-out to occur, you will
return to the default menu cycle.
The Exit Menu menu allows the user to return
to the Image Controls menus by pressing the
key or the user may return to the default
MENU
menu cycle by either pressing
allowing the time-out to occur.
On power up, the RGB 302/304 will default to the last
settings which were current just prior to the power off.
All 25 user-defined memory blocks will be saved if
Memory Cycling had been set On.
On system reset, the RGB 302/304 will have the
following default settings:
All 25 user-defined memory blocks will be cleared, but
the 15 factory preset memory blocks will be retained.
Extron RGB 302/304 Universal Interface • User's Manual
Chapter 3 • Front Panel Menus
keys simultaneously to reset or
to return to the default menu
or by
NEXT