Table of Contents
Advertisement
Horizontal Polarity Menu
Vertical Polarity Menu
Page 3-9
If sync output is Auto, the possible sync
output configurations are: sync on Green (3-
cable hookup), Composite sync (4-wire
hookup), or Separate H & V (5-wire hookup).
See the example Default Cycle sync output
menus on the left.
If the sync output specified above was
Separate H & V, the horizontal and vertical
polarities may be changed as described in the
next sections.
The Horz. Polarity menu allows the user to
change the horizontal polarity of the sync
output. The horizontal polarity is selected by
pressing either the
cursor key and choosing either normal
<norm>, positive <+>, or negative <->.
Normal means output polarity will be the same
as input polarity with shifting allowed.
Press
to go to the Vertical Polarity
NEXT
menu, or press
Controls menus, or allow the time-out to occur
to save any changes.
The Vertical Polarity menu allows the user to
change the vertical polarity of the sync
output. The vertical polarity is selected by
pressing either the
cursor key and selecting either normal
<norm>, positive <+>, or negative <->.
Normal means output polarity will be the same
as input polarity with shifting allowed.
Press
to return to the Sync Controls
NEXT
menus, or press
Option Controls menus, or allow the time-out
to occur to save any changes.
Extron RGB 302/304 Universal Interface • User's Manual
Chapter 3 • Front Panel Menus
or
or
to advance to the Option
MENU
or
or
to advance to the
MENU
or
or
Advertisement
Table of Contents
