Comdial DSU II User Manual page 71
Dsu ii digital expandable systems lcd speakerphone station
Hide thumbs
Also See for DSU II:
- System manual (450 pages) ,
- User manual (50 pages) ,
- System reference manual (136 pages)
Table of Contents
Advertisement
GCA70-281
Program the auxiliary jack enable/disable buttons (at any
blank programmable button location) as follows:
1. PRESS INTERCOM.
2. DIAL
3. PRESS programmable button.
4. DIAL a feature code:
•
•
•
•
5. PRESS TRNS/CONF.
6. REPEATEDLY PRESS programmable button AND DIAL
separate codes until all four buttons are programmed, OR PRESS
SPEAKER to end.
To use an auxiliary jack feature button,
1. PRESS desired button to enable mode. The display denotes the
feature and shows it to be enabled.
To disable any active mode, press the corresponding feature button to alternate off.
With the exception of a headset microphone, do not connect the audio output
of any external device to the auxiliary jack. Also, do not connect the tip and
ring leads of a telephone line to the auxiliary jack. Do not connect any de-
vices to the auxiliary jack other than those mentioned above.
LCD Speakerphone Station User's Guide
.
= Headset Button,
= External Ringer Button,
= Tape Recorder Button,
= External Pager Button.
CAUTION
Other Features
63
Advertisement
Table of Contents
