Comdial DSU II User Manual page 69

GCA70-281
To send a call back message to someone's Tracker Pager
without first calling them,
1. PRESS INTERCOM.
2. DIAL
3. DIAL station extension number.
4. HANG UP handset OR PRESS SPEAKER to end. The Tracker
Pager system will transmit your station extension number to the
caller's Tracker Pager display. (Some models will also display your
station name if the system is programmed to include station names.)
To park a call and have Tracker Pager tell someone to retrieve
the call,
1. ANSWER call AND PRESS TRNS/CONF.
2. DIAL Extension.
3. PRESS programmed TRACK button OR DIAL
4. Your display shows park orbit ( 91 through 99 ) and then returns to
idle*.
5. Hang up handset or press SPEAKER to end. The Tracker Pager
system will transmit orbit dialing code and caller ID information, if
available, to called party's Tracker Pager display. (Alphanumeric
models display #91 through #99 while numeric-only models display
-91 through -99.)
* If the Tracker paging system does not accept your actions, an error tone will sound at your telephone.
To respond when your Tracker Pager displays park orbit
dialing code,
1. From any system station, PRESS INTERCOM.
2. DIAL
3. DIAL displayed orbit code (
4. RETRIEVE call.
LCD Speakerphone Station User's Guide
.
.
.
to ).
Other Features
61