GCA70-281
5. SELECT line button to dial out on or press INTERCOM.
6. DIAL any number up to 16 digits long (include
needed).
NOTE:
You may need a pause between numbers to compensate for differences
in response time between your system and the host system (ask your attendant
about this). To store a pause, press HOLD , then continue dialing. If your system
is behind a host system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
Also, you may need to erase the typed digits appearing in your display to
correct them. If you do, select BKSP once for each digit to be removed.
7. SELECT SAVE to store number.
8. PRESS next location button AND STORE next
number.
9. REPEAT previous step until all numbers are
stored, OR PRESS SPEAKER to end.
LCD Speakerphone Station User's Guide
Speed Dial and Autodial Programmable Locations
and
918049782200
SAVE
R
Programming
if
BKSP
PREV
Entering a Number
47