Remote Access; Connect With The Answering System; Voice Menu - AT&T 2325 User Manual

REMOTE ACCESS

Connect with the Answering System

You can access many features of this system remotely from a touch
tone phone.
1
Dial your telephone number.
2
When the system answers enter your Remote Access Code
(preset to 50). The system beeps twice and announces the
number of new messages on the system.
3
Within two seconds, enter a remote command (see "Remote
Access Commands").
Press * 0 to exit remote operation.
4

Voice Menu

The system has voice prompts to help you with remote operation.
Press * 5 to hear the menu while remotely connected to the
answering system.
REMOTE ACCESS COMMANDS
FUNCTION:
Play messages in
a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
50
COMMAND:
Press the appropriate mailbox number
(1, 2, or 3). The system plays new
messages. If there are no new messages,
the system plays old messages.
Press # 4 while message is playing; each
press backs up another message.
Press # 6 while message is playing; each
press advances another message.
Press # 5.
Hang up.
Press # 9 while message is playing.
Press # 7; system plays announcement,
then beeps.