AT&T 2325 User Manual page 77

2 Install the handset battery.
Use only AT&T Battery 3301, SKU# 91076.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
3 Charge the handset battery.
• Place the handset in the charging stand.
• Charge the battery at least 12 hours. After the first charge,
the battery will charge in eight hours.
4 Register your handset.
After handset is fully charged place it in the base of your
2320, 2325, 2355, or 2365 telephone, it will automatically be
registered and you will hear a single beep. If you try to register
a fifth handset, registration will be blocked.
5 Check for dial tone.
Lift the handset and press P; you should hear a dial tone.
4
b) Plug the battery pack
connector into handset.
Place the battery pack and
wires in the compartment.
c) Replace cover by
sliding it on its
track up over
battery case until
it snaps firmly
into place.