Ring Pattern - AT&T 2325 User Manual

Ring Pattern

The external ring pattern sets which ringer you hear
when you have an outside call. The internal ring
pattern sets which ringer you hear when you have
an intercom call from another registered handset (if
installed). External ring pattern default setting is 0;
internal ring pattern default setting is 1.
◗ ◗ ◗
◗ ◗
❖ ❖ ❖ ❙ ❙ ❙
❖ ❖ ❙ ❙
w w w
w w
1 Press S. The screen displays
Press + to - until the screen displays
2
3 Press S. The screen displays
Press - or + then S to choose EXTERNAL
4
or INTERNAL.
5
Use the keypad to enter a ring pattern
selection (0 – 9)
— OR —
Press - or + to display desired setting.
A sample of the displayed setting is played
briefly.
6 Press S to save displayed setting. You will
hear a confirmation tone.
7 Press C to exit ring pattern setup.
>CALL LOG
PHONE BOOK
>RING PATTERN
KEY CLICK
>EXTERNAL
INTERNAL
9