Locator Button
USB Port3
USB Port 2
LocatorButton on SPARC Enterprise T2000 Chassis
FIGURE 2-1
●
To turn on the Locator LED, from the ALOM CMT command prompt, type:
sc> setlocator on
Locator LED is on.
●
To turn off the Locator LED, from the ALOM CMT command prompt, type:
sc> setlocator off
Locator LED is off.
●
To display the state of the Locator LED, from the ALOM CMT command prompt,
type:
sc> showlocator
Locator LED is on.
Note – You do not need user permissions to use the setlocator and
showlocator commands
32
SPARC Enterprise T2000 Server Administration Guide • April 2007