Logging In To Alom Cmt - Fujitsu SPARC Enterprise T2000 Administration Manual

After you log in to your ALOM CMT account, the ALOM CMT command prompt
(sc>) appears, and you can enter ALOM CMT commands. If the command you want
to use has multiple options, you can either enter the options individually or grouped
together, as shown in the following example. The commands are identical.
sc> poweroff -f -y
sc> poweroff -fy

Logging In To ALOM CMT

All environmental monitoring and control is handled by ALOM CMT on the ALOM
CMT system controller. The ALOM CMT command prompt (sc>) provides you with
a way of interacting with ALOM CMT. For more information about the sc> prompt,
see "ALOM CMT sc> Prompt" on page
For instructions on connecting to the ALOM CMT system controller, see:
"Accessing the System Controller" on page 7
■
"Activating the Network Management Port" on page 8
■
Note – This procedure assumes that the system console is directed to use the serial
management and network management ports (the default configuration).
28 SPARC Enterprise T2000 Server Administration Guide • April 2007
19.