Fujitsu SPARC Enterprise T2000 Administration Manual page 78

2. Select the disk name that represents the RAID volume that you have configured.
In this example, c0t2d0 is the logical name of the volume.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
Specify disk (enter its number): 2
selecting c0t2d0
[disk formatted]
FORMAT MENU:
56 SPARC Enterprise T2000 Server Administration Guide • April 2007
0. c0t0d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c0t2d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@2,0
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit