Fujitsu SPARC Enterprise T2000 Administration Manual page 84

2. Type the following command:
# cfgadm -al
For example:
# cfgadm -al
Ap_Id
c0
c0::dsk/c0t0d0
c0::dsk/c0t1d0
c0::dsk/c0t2d0
c0::dsk/c0t3d0
c1
c1::dsk/c1t0d0
usb0/1
usb0/2
usb1/1.1
usb1/1.2
usb1/1.3
usb1/1.4
usb1/2
#
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
The -al options return the status of all SCSI devices, including buses and USB
devices. In this example, no USB devices are connected to the system.
62 SPARC Enterprise T2000 Server Administration Guide • April 2007
Type Receptacle
scsi-bus connected
disk connected
disk connected
disk connected
disk connected
scsi-bus connected
CD-ROM connected
unknown empty
unknown empty
unknown empty
unknown empty
unknown empty
unknown empty
unknown empty
Occupant Condition
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
unconfigured ok
unconfigured ok
unconfigured ok
unconfigured ok
unconfigured ok
unconfigured ok
unconfigured ok