Stop-F Functionality - Fujitsu SPARC Enterprise T2000 Administration Manual

2. Type the following command:
sc> bootmode reset_nvram
sc> bootmode bootscript="setenv auto-boot? false"
sc>
Note – If you do not issue the poweroff and poweron commands or the reset
command within 10 minutes, the host server ignores the bootmode command.
You can issue the bootmode command without arguments to display the current
setting
sc> bootmode
Bootmode: reset_nvram
Expires WED SEP 09 09:52:01 UTC 2005
bootscript="setenv auto-boot? false"
3. To reset the system, type the following commands:
sc> reset
Are you sure you want to reset the system [y/n]?
sc>
4. To view console output as the system boots with default OpenBoot configuration
variables, switch to console mode.
sc> console
ok
5. Type set-defaults to discard any customized IDPROM values and to restore
the default settings for all OpenBoot configuration variables.

Stop-F Functionality

The Stop-F functionality is not available on systems with USB keyboards.
34 SPARC Enterprise T2000 Server Administration Guide • April 2007
y