Table of Contents
Advertisement
Object Searches
To create a new SRVC object
1. Press PGM for Program Mode.
2. Press
softkey, then press
NEW
view the available Search types.
3. Press the
softkey.
SRVC
4. Press
to scroll to the
5. Press
or
to select the type of search you
want to define. Service types include Public
Safety, Aircraft, Amateur, CB, Marine, FRS/
GMRS/MURS/DOT and Railroad.
6. Press
softkey to store your SRVC search
Save
as an object.
To activate SRVC search:
1. Press MAN during scanning to enter Manual
Mode.
2. Press
or
to scroll through the objects to
.
SRVC
3. Press the
softkey to activate the SRVC
SRCH
search. SRVC search stops when an active
frequency is found.
frequency lockout list
4. To resume searching, press
softkey to
SRCH
field.
Srvc:
.
58
Signal Stalker II Object (STLK)
A Signal Stalker Object (STLK) stores the parameters
necessary for the radio to rapidly sweep a range
of frequencies for strong signals from nearby
transmitters. A STLK object can be used for
standalone operation—the radio just sweeps and
stops when activity is detected, or for stalking that
is performed while the radio is scanning. During
scanning, the radio will check for activity on all the
enabled Scannable Objects: TGRP objects, CONV
objects, LMIT objects and STLK objects.
Essential Parameters
By default, a newly created STLK object is
ready to go without any changes. In its default
configuration, the STLK object will sweep through
all of the important land mobile radio bands
and look for strong signal activity from nearby
transmitters. You may wish to include or exclude
some bands in your sweeps in order to check other
frequency ranges or to limit the amount of time
the scanner spends sweeping frequency ranges
where local transmitter activity is less likely. See
"Appendix B: Detailed Menu Reference: STLK Menu" on
page 122 for detailed menu information.
To create a new STLK object:
1. Press PGM to place your scanner into
Program Mode.
2. Press
softkey, then press
NEW
view the available Search types.
3. Press
STLK
softkey.
4. Scroll down to
Type:
to change between
Safety.
Refer to "Dedicated Signal Stalker II" on page 64 or
"Appendix A: Search Bands" on page 100 for sub-
band frequency information.
Object Searches
softkey to
SRCH
and press
if you want
and
All Bands
Public
59
Hide quick links:
Advertisement
Table of Contents
