Radio Shack 20-106 User Manual page 54

Menu Reference
GLOB Options
Parameter
LCD BlinkOff 1-250 x
10 mS
LCD BlinkOn 1-250 x
10 mS
LED BlinkOff 1-250 x
10 mS
LED BlinkOn 1-250 x
10 mS
Pri Channels 0-250
Pri Interval 2-100 x
100 mS
TGRP Pri Int On or Off
QuickPriRtn On or Off
Search Delay 1-250 x
100 ms
SRCH Dig On or Off
AGC
SRCH On or Off
SuprTrk
Description
For alternating text displays,
sets the display time for the
secondary display element.
For alternating text displays,
sets the display time for the
primary display element.
When the Alert LED setting for
an object is set to Flash, this
is the amount of time the LED
stays turned off.
When the Alert LED setting for
an object is set to Flash, this
is the amount of time the LED
stays turned on.
Number of priority CONV
channels to check during a
priority scan sampling. "0" sam-
ples all CONV priority channels.
Conventional frequency priority
sample interval.
Toggles priority interrupt
scanning during trunked calls.
When on, does not wait for
verification of correct CTCSS,
DCS or NAC when returning to
an active CONV channel after
priority sampling
Sets wait for reply delay for all
search modes.
Sets digital AGC mode on or
off for all search types. Useful
to compensate for low or high
digital audio levels caused at
the system.
Alternative DSP decod-
ing algorithm is applied to
all search types. May help
reception on some systems.
106
GLOB Options
Parameter
TLO=FUNC On or Off Controls the operation of the
L/O L/OUT key. When Off, pressing
L/OUT performs a Temporary
Lockout of the selected object.
When On, pressing L/OUT
performs a Permanent Lockout
of the selected object.
Dupe- Yes or No If set to Yes, dupe checking will
ChecksSQ check both the stored frequen-
cy and any encoded squelch
settings when checking for du-
plicate CONV objects.
TGID Format Norm, Selects TGID display format.
DEC,
or HEX
TGRP Ignore Yes or No If set to Yes, TGRP wildcards
will ignore calls on previously
stored TGRPS that are mapped
to disabled Scan Lists.
ShowCCInfo Yes or No For Motorola and P25 systems,
shows current control channel
index (from TSYS frequency list)
and frequency alternating with
the voice frequency.
Set Password SEL Set Power-on password.
0000=none.
107
Menu Reference
Description