Radio Shack 20-106 User Manual page 18

Digital trunking handheld radio scanner
Hide thumbs Also See for 20-106:
Table of Contents

Advertisement

Creating Scannable Objects
Note: By default all new objects are mapped to
Scan List 01. Refer to "Grouping Objects with Scan Lists"
on page 42 for more information on Scan Lists.
To create a new TSYS object.
1. Press PGM to put scanner in Program Mode.
2. Press
softkey to create new object.
NEW
3. Press
softkey to create a trunking
TGRP
system object.
Talkgroup
>
Scan Lists:
TSYS:
Save
4. Press
or
to scroll through the talkgroup
object parameters until the cursor is at
5. Press SEL.
Trunked System
>
Type: MOT
Tag: System
Save
6. The cursor should be on
7. Press
or
to select the desired trunking
system.
8. Press
to scroll to Tag: and enter a new
name for the system. See "Appendix C: Text Entry
and QuickText" on page 125 for information on
entering text.
9. Press
to scroll to
the control frequencies for the system.
<
*01
NEW
Exit
Dflt
TSYS:
<
800/900
Exit
Dflt
TYPE:.
Appendix C: Text Entry
to enter
Frequencies:
34
10. Press SEL.
11. At
use the number keys and • to enter
Ch01:,
the first control channel frequency for the
system.
12. Press
and repeat Step 11 to add any other
control channels used by the system.
13. Press the
SAVE
14. Press
SAVE
into memory and return to the TGRP menu.
Scan Lists:
TSYS: System
ID:
Save
15. Press
to scroll to
.
By default, the trunking talkgroup ID is set to
.
Wildcard
To change the ID, press the number keys to
enter the specific talkgroup ID. Press ENT or
DONE softkey to store the ID.
See "Talkgroup Notes" below for more
information about wildcard and other
talkgroup configurations.
16. Press
to scroll down to
name for your talkgroup that corresponds
with its purpose on the trunked radio system.
See "Appendix C: Text Entry and QuickText"
Appendix C: Text Entry and QuickText" on
page 125 for information on entering text.
17. Press ENT or the
name, then press
TGRP as a new object.
Creating Scannable Objects
softkey to save.
softkey again to store the new TSYS
*01
Wildcard
Exit
Dflt
ID:.
and enter a
Tag:
DONE
softkey to store the
softkey to store the
SAVE
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro-106

Table of Contents