Tgrp Menu - Radio Shack 20-106 User Manual

Menu Reference
CONV Options
Parameter
Skywarn Yes or No
EXPERT BELOW
Modulation Auto,
AM,
FM,
NFM
Atten On or Off
Delay On or Off
Delay Time 1-250 x
100ms
Digital AGC On or Off
Supertrack On or Off
AudioBoost On or Off
Hit Count Numeric
value
Description
When On, the CONV object is
a member of the Skywarn Scan
List.
Modulation setting for the
CONV channel. In most cases
Auto will work fine. Use AM
to override and force AM
modulation, FM to force FM
modulation, NFM to force
narrow FM modulation.
When on, applies 20 dB of
attenuation to all transmissions
on the CONV channel. Useful in
areas where interference from
nearby strong signals is present.
Controls whether a Delay is
used to wait for reply traffic after
a transmission on the CONV
channel.
Sets the amount of time (in 100
millisecond intervals) for the
wait for reply delay if Delay is
On, e.g., 20=2 seconds.
Controls Digital AGC function
for the CONV channel.
Alternative DSP decoding algo-
rithm. May help reception on
some systems.
Applies a 6 dB boost to audio
levels when the object is active.
Increments each time a
transmission is received on
the CONV object. Global "Hit
Counts" must be set to ON.
Dflt
Press the softkey to reset
to 0.
110

TGRP Menu

The TGRP menu is used when creating new
Trunking Talkgroup objects, or editing existing
Trunking Talkgroup objects.
TGRP Options
Parameter
Scan Lists On or Off Sets membership in Scan Lists.
for Scan Use
Lists 1-22 Scan Lists. Use SEL key to
toggle Scan List membership. A
"*" next to the Scan List num-
ber indicates that the object is
mapped to that Scan List.
TSYS New or To enter a new trunking sys-
previously tem, use the
stored through the stored systems
trunking until NEW appears, then press
system SEL to enter the parameters for
object the new TSYS. To use a trunking
(TSYS) system that you have previously
entered, use the
scroll to the desired system.
ID Decimal, The digital address of the talk-
hex or group or individual radio ID on
AFS, de- the trunked radio system.
pending
on TSYS
type
Type Group or Use Group for talkgroup ID,
Private Private for individual radio ID.
Tag Alpha- The alphanumeric display name
numeric for the TGRP. Use the standard
text text entry method or QTXT to
name the object.
L/Out On or Off Permanent lockout for the
TGRP. Also accessed by
pressing FUNC L/OUT while
the scanner is stopped on the
TGRP object.
Priority On or Off Turns Priority Mode on or off for
the TGRP object.
Menu Reference
Description
keys to scroll through
keys to scroll
keys to
111