Stlk Menu - Radio Shack 20-106 User Manual

Menu Reference

STLK Menu

The STLK menu is used when creating new Signal
Stalker II objects, or editing existing Signal Stalker
II objects.
STLK Options
Parameters
Scan Lists On or Off
for Scan
Lists 1-22
Type All Bands
or Pub
Safety
Sub-bands
, SEL
Tag Alpha-
numeric
text
L/Out On or Off Permanent lockout for the
LED Mode Solid or
Flash
LED Color 0-7
Description
Sets membership in Scan Lists.
Use keys to scroll through
Scan Lists. Use SEL key to tog-
gle Scan List membership. A
"*" next to the Scan List num-
ber indicates that the object is
mapped to that Scan List.
Use to select All Bands or
Public Safety. All Bands covers
the entire frequency range of
the scanner. Pub Safety covers
frequency ranges commonly
used for public safety commu-
nications.
Sub bands are available when
using STLK in All Bands or Pub-
lic Safety mode.
See Appendix A on page 100 for
Search Band Group frequencies.
The alphanumeric display
name for the STLK object. Use
the standard text entry method
or QTXT to name the object.
STLK search. Also accessed by
pressing FUNC L/OUT while
the scanner is stopped on the
STLK object.
Controls whether the Alert
LED flashes or remains on solid
when the Alert LED is used.
Sets LED color to 0-7 as de-
fined in the GLOB menu. By
default, 0=LED Off, 1=Red,
2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
122
STLK Options
Parameters
Latch LED On or Off Normally the Alert LED is active
only while the object is receiv-
ing a transmission. When Latch
is on, the Alert LED will remain
lit after the transmission is com-
plete, unless overridden by a
subsequent object that is also
using the Alert LED.
Backlight On, Off Controls whether the backlight
or Flash should be on, off or flashing
while the object is active.
Alarm None, Sets the Audible Alarm for the
STLK object. When an Audible
Chirp,
Alarm is selected, the selected
Hi-Lo,
alarm will play anytime the
Alert,
scanner stops for activity on the
Ring,
STLK object while scanning.
2-Chirp,
Fast
Hi-Lo,
DTMF#
Fav Yes or No When On, the STLK object is a
member of the Favorites Scan
List.
EXPERT BELOW
Atten On or Off When on, applies 20 dB of at-
tenuation to all hits received on
the STLK search. Useful in areas
where interference from nearby
strong signals is present.
Delay On or Off Controls whether a Delay is
used to wait for reply traffic af-
ter a transmission on the STLK
search.
Delay Time 1-250 x Sets the amount of time (in 100
100ms millisecond intervals) for the
wait for reply delay if Delay is
On, e.g., 20=2 seconds.
123
Menu Reference
Description