Appendix B: Detailed Menu Reference; Glob Menu - Radio Shack 20-106 User Manual

Menu Reference

Appendix B: Detailed Menu Reference

• Context sensitive help is available for every menu
parameter. Press FUNC SEL to view help for the
selected parameter. Press SEL to exit help.
• Each menu parameter includes a
softkey, which restores the factory default
setting for that parameter.

GLOB Menu

The GLOB menu stores all of the radio-wide
settings used by the scanner. The active
parameter is always the middle parameter and is
indicated by a flashing colon (:).
Notes:
• Some GLOB parameter changes do not take
effect until the GLOB menu is saved.
• You can restore all GLOB settings to their defaults
without affecting your programmed objects or
V-Scanners. Power cycle the radio, then press
0, then 2 during the welcome message display.
Press ENT to confirm the GLOB parameter reset.
• The Special Global menu (FUNC GLOB)
includes parameter settings that may adversely
affect the performance of your radio if not
set properly. We recommend that users not
change the settings found in the FUNC GLOB
menu without specific instructions. Should
you experience difficulties after changing any
of these settings, you can restore them to
factory defaults by pressing the
associated with each menu line, or follow the
global reset procedure described above. See
the product support page for this scanner on
www.RadioShack.com for detailed information
on the FUNC GLOB menu.
Dflt
softkey
Dflt
102
GLOB Options
Parameter
Contrast 1-7
Sets LCD contrast. Use
on 5-way pushbutton pad.
Owner SEL Enters sub menu to set Wel-
come Message text display.
Clone Send SEL Press SEL to send data using
clone mode.
Alert Mode Both, Controls the Alert LED and
Tone, Audible Alarm behavior. Both
Light, Off allows the LED and Tone. Tone
allows the audible alarm only.
Light allows the LED only. Off
deactivates the Alert LED and
Audible Alarm feature.
Sound Mode Key or Controls all radio beeps.
Stlth
Key Beeps On or Off Controls key beeps.
Light Mode Norml, Controls the backlight opera-
tion. Norml (Normal) uses the
Key,
backlight key on the keypad.
Ignre,
Key activates the backlight
On,
when any key is pressed. Ignre
Stlth
activates the backlight when a
key is pressed, and that key's
normal function is ignored if
the backlight is off when it is
pressed. On causes the back-
light to remain on all the time.
Stlth (Stealth) disables the
backlight.
Light Area Both, Controls what area is illuminated
when the backlight is on. Both
LCD,
illuminates the LCD and the
Keybd
keypad. LCD illuminates the
display only. Keybd (Keyboard)
illuminates the keypad only.
Light Secs 1-99 Controls the amount of time
seconds the backlight remains on for
Normal, Key and Ignore light
modes.
103
Menu Reference
Description
keys