Making The Auto Cut Setting - Epson Stylus Pro 7800 User Manual

Amount of
Enlargement
4. Make the Auto Cut setting. See "Making the Auto Cut setting"
on page 129.
5. Click OK.
6. Start printing your data from your application.

Making the Auto Cut setting

This setting is available only when Roll Paper or Roll Paper
(Banner) is selected as the Paper Source setting. You can select
how the paper is cut after printing.
Single Cut
Select this setting if you want to save paper.
If you select this setting, the boundary of a picture or the boundary
of a page is cut. However, the cut position may shift slightly.
When you select Auto Expand, the slider becomes
available. Using the slider, you can control the
amount of the image that extends beyond the
edges of the paper during borderless printing.
For most print jobs, Standard is recommended in
order to eliminate margins on all sides of the paper.
In a very humid environment, the width of paper may
expand due to moisture absorption. In this case,
move the slider to Max to eliminate margins around
the image. If Max is selected, the center of the image
may move about 1 mm to the right.
Moving the slider towards Min decreases the amount
of the image enlargement; however, as this amount
decreases, margins may appear on one or more
sides of the paper.
Printing with Mac OS 9.x
2
2
2
2
2
2
2
2
2
2
2
2
129