Initialization; Standards And Approvals - Epson Stylus Pro 7800 User Manual

Initialization

Hardware initialization at power on
Software initialization when the
ESC@ (initialize the printer)
command is received
Panel button initialization by
pressing the Pause button on the
control panel for 3 seconds, or *INIT
signal is sent

Standards and Approvals

Safety
364
Product Information
The printer mechanism is set to its
initial state.
The input data buffer and print
buffer are cleared.
The printer returns to the default
condition last set.
The print buffer is cleared.
The printer returns to the default
condition last set.
Print head capping occurs.
Paper is ejected, if any.
The input data buffer and print
buffer are cleared.
The printer returns to the default
condition last set.
UL 60950
CSA 22.2 No. 60950
Low Voltage Directive 73/23/EEC EN 60950